AUTONET TV

A Sticky Brake Situation (Parking Brake Service and Maintenance)

We've all been there.  You park your vehicle on a steeper than usual hill and worry about it rolling down while you're running your errands.  So you decide you'll use the parking brake.  When you get back, you release the parking brake, hit the ignition, put it in gear and—uh, oh—you can feel the parking brake is still on.  It's stuck.  What do you do now?

Welcome to the world of infrequently-used parking brakes.  Yes, they do stick for several reasons. It's common for components to corrode and get locked up.  Sometimes if you have applied it extra hard, it can jam.  Could be a rusty cable, could be a spring that doesn't return the brake to its disengaged position.  Some pieces just break when they're stressed for the first time in a while. A caliper or the pivot arm it's on can also stick.

There are a few things you can try to unstick it.  Carefully rock your vehicle by putting it first in drive and then reverse.  You have to be careful doing that, though, because sometimes you can damage the transmission.  You can try working the parking brake control a few times to see if that will loosen the corrosion.  If you can't unstick it, you can try driving slowly a short distance to a repair facility near you.  Sometimes it won't cause damage to the brakes but it depends on how tightly the parking brake was applied and what was stuck.  You may also have to have your vehicle towed to a repair facility.

In any case, once you've seen these symptoms, have your vehicle brakes looked at by a professional who can fix the root of the problem.  Better yet, don't let your vehicle get in this condition; regular maintenance and inspections by a trained technician should prevent you from getting in a jam somewhere thanks to a stuck parking brake.  You could use a "brake" like that.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

Keeping Your Cool (Water Pump Replacement)

No matter what the temperature is outside, it's important for your vehicle's engine to remain cool, calm, and collected.  Well, cool, anyway. If your vehicle has a gasoline engine, it's powered by a bunch of explosions involving spark plugs, pistons, gasoline, and air.  And the by-product of all those things working together? HEAT.

There's a whole cooling system to keep everything at a tolerable temperature for your engine's parts, and a key part of that is the water pump.  Technically, it's pumping more than water. It should actually be called the "coolant" pump since the liquid that circulates through the system is a mixture of water and coolant. 

Basically, the water pump keeps this coolant moving through your engine, where it picks up the engine heat, and then is pumped into the radiator where it gets rid of that heat.  When a water pump fails, the engine heat can build up.  When you get a warning light on the dash (either a gauge or a light) that shows the temperature is too high, it could mean a bad water pump. 

They can fail for many reasons. They have bearings in them that wear out, as does the seal between the pump and the engine. They're often driven by a belt or chain that can go bad.  Corrosion can spell the end of a water pump, too. 

If a technician determines your water pump has failed, it's time to replace it. In addition, other components of the cooling system will be inspected.  The best way to avoid a water pump failure is regular maintenance of your cooling system which includes regular draining and flushing of the coolant. 

Just like it's important for you to keep your cool, the same goes for your vehicle's engine.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

Steering You Right (Tie Rod End Replacement)

For drivers, S stands for safety.  And there are three other words that start with S that are all equally important: starting, stopping and steering. For your vehicle to be at its safest, all three functions must be in top shape. 

Steering is one of those things we take for granted.  After all, you turn the wheel and your vehicle changes direction. But sometimes you might notice your steering is a little off.  Maybe you've noticed you turn your wheel slightly and your vehicle doesn't turn. You may feel a little vibration in the wheel that increases when you go faster.  You may hear a little squeak from the wheels when you steer and you may notice your tires aren't wearing evenly.

These are signs that your tie rod ends may be failing. Tie rod ends help connect your vehicle's steering mechanism to the wheels.  They can wear out after you've hit one too many potholes or just from constant use.  They can cause sloppy steering and loose handling, and they should be replaced when they've reached the end of their life span.

If you notice any of these things happening on your vehicle, bring it in to us so a technician can check it out.  There are a couple of different types of steering, recirculating ball steering and the one most of the latest vehicles have, rack and pinion. When we replace your tie rod ends, we will remove and replace the old ones and adjust them to meet your vehicle manufacturer's specifications.

Tie rod ends should often be replaced in pairs, and your vehicle should be aligned afterwards.  Keep your steering working the way it's supposed to, and your vehicle will be sure to steer you right.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

The Vivacious Vernal Vehicle (Preparing Vehicle for Spring)

Most of us look forward to spring because the days are longer, the weather's warmer and we can finally get our vehicles into warm weather mode.  Here are a few things that will breathe fresh energy into anyone's car, SUV, truck or van.

First thing is a good cleaning, especially underneath. If you live where salt and brine are used on the roads, it's important to get that off.  One thing to note… if you hose off your undercarriage, be careful not to get your spark plugs/wires wet.  You could notice your vehicle running rough plus the Check Engine light may come on. It usually dries out quickly, but if the engine light stays on for more than a couple of days, have your service facility check it out.

Next, replace your windshield wipers.  They've taken a beating through the winter. New ones will have fresh rubber and you'll see clearly (and safely) out your windshield again.

Have your brakes inspected.  That salt doesn't do your brake's metal components any good.  Have a technician make sure your pads and rotors are clean and properly lubricated so they can stop you when you ask them to.

Speaking of wheels, it's a good time to have your tires checked, too.  Road debris and potholes can take a toll on tread and sidewalls. It may also be a good idea to have a technician check your alignment since you likely have hit something pretty hard on a patch of rough road at some time during the winter.

Make sure your tire pressure is appropriate for the rising temperatures. As the outside air warms up, your tire pressure climbs without you adding any air.  Make sure it's what the manufacturer recommends.

Finally, treat your vehicle's interior to a thorough refresh.  Those floor mats and carpets may be white with salt; clean 'em up.  Get rid of wrappers, drink lids, empty water bottles and anything else that's fallen down.  And if you need to, have your upholstery cleaned so it looks and smells new. A clean exterior is nice, but since you spend your time inside your vehicle, it'll feel even better when your cabin is sparkling fresh.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net