AUTONET TV

Fuel Injection: It Keeps Getting Better for North Kingstown Drivers

North Kingstown residents know that engines need to burn fuel to operate. Fuel is pumped from your fuel tank to your vehicle engine where it is squirted—or injected—into your engine's cylinders. This is the function of the fuel injectors.

There are two ways to inject fuel into an engine. Fuel needs air to burn, so in the first method, fuel is injected into a port and allowed to mix with air—before it is drawn into the cylinders. In the second method, fuel is injected directly into the cylinders and mixes with air after it enters the vehicle engine.

Direct injection engines burn fuel more efficiently than conventional vehicle engines. Some models can deliver the power of a V8 with the economy of a V6.

For example, in one family of engines, the conventional version (a V6) delivers about 250 horsepower. The direct injection version delivers over 300 horsepower and gets about the same gas mileage. The turbocharged version delivers 350 horsepower.

Why the big difference in power? Direct injection systems allow fuel to be squirted into the vehicle engine at hundreds of times the pressure of a conventional engine. This atomizes the fuel better (breaks it down into tinier droplets), which means more of it gets burned, which translates to more power for your engine. It also results in cleaner emissions.

Fuel injectors are precision instruments. They have to deliver the right amount of fuel at exactly the time the vehicle engine needs it. They are also engineered to inject fuel with a specific spray pattern. This spray pattern allows for maximum fuel efficiency and proper atomization. Direct injection engines require a much higher degree of precision than conventional engines. For this reason, they are equipped with more sophisticated computers.

When fuel injectors get dirty, their precision drops off. The spray pattern won't be precise, and the timing of fuel delivery may be off. This decreases fuel efficiency and fuel economy as well as delivering less power to the engine.

North Kingstown residents should understand that fuel injectors are not cheap to replace. Direct injection fuel injectors are even more . And we're talking a mortgage payment to buy a set of new fuel injectors for a diesel engine.

So keeping your fuel injectors clean is just good auto advice. The best way to do this is to change your air and fuel filters regularly and practice other habits of good vehicle care and preventive maintenance. Cleaning additives in your fuel can also help.

If you do end up with gum or varnish in your fuel system, you'll need a professional fuel system cleaning. This will clean out your whole system, including the injectors. The good news is that with proper maintenance, North Kingstown drivers will enjoy better fuel economy and their fuel injectors will last for a long time.

Contact us for more tips to help you improve your performance and safety.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

When "Oh, no!" Turns Into, "All right!"

Things we don't expect happen to our vehicles. And let's face, no one really wants to spend money on an unexpected repair. But if you are putting off going to your vehicle repair facility because you're dreading bad news, you might just be putting off some good news.

There was one minivan driver who'd had the same van for years and never had a problem with the power sliding doors.  Then one day, the electrical switches in the door pillars stopped working.  The key fob would still open them, but the door switches wouldn't do a thing.

Of course, the van driver feared the worst: an electrical problem, a major computer failure, mice chewing up the wires.  So, he put off going into the repair facility for a couple of months.  One day, it was time for his regular oil change and the service advisor asked him if there was anything else going on with the van.  The owner mentioned the door problem but said he didn't want to spend a fortune on it.

He waited for his van, and it wasn't long before the service advisor came out with good news. The doors weren't working because a switch on the overhead console had been turned off.  (It was a safety feature to allow parents to disable them.) The owner had accidentally switched it when he was unloading the van.  It was the first thing the technician had checked. Flip the switch back and all was working as usual.

Another example? A mother was driving a minivan with her two kids inside on a hot day when she felt the front end shaking violently as she drove down the road. Fearing something major had broken in the van (and fearing for the safety of her kids), she pulled into a fast-food restaurant parking lot and started to look underneath to see if it was anything obvious she could see.

She couldn't see any broken parts, but she also didn't feel safe getting back in the van with her kids.  So, she called her local service facility and asked if they could send someone to look at it.  When the technician arrived, he took it for a test drive on the same road on which she'd described having the trouble.  Then he put her van up on the lift.  His conclusion?  Nothing was wrong with her van.  It was the street she was driving on.  Crews repairing it had left the surface full of potholes, and that was causing her rough ride.

Ultimately, what these two drivers feared would be an expensive trip to the shop resulted in each driver getting different news than they had expected.  One learned something new about his vehicle.  The other?  Well, the technician saw that her tires were badly worn and convinced her to get them replaced, perhaps preventing an accident and giving peace of mind for a mom with two kids.

Timing Belt Replacement in North Kingstown

Today we want to talk to North Kingstown drivers about timing belts. They're something that many drivers don't know much about and yet your vehicle won't run if it's broken – and it could cause many thousands of dollars damage if it does break. A broken timing belt is usually a tale of woe. Even though timing belt replacement is scheduled in the owner's manual, it's not the kind of thing that most North Kingstown area auto owners remember because it's not well understood.

Let's review what a timing belt does. As most know, the engine's power is generated in the cylinders. A piston rides up and down in the cylinder. During the first down stroke, an intake valve at the top of the cylinder opens and air and fuel is drawn into the cylinder. Then the piston returns to the top, compressing the fuel and air mix. At the top, the spark plug fires, igniting the fuel, pushing the piston down in the power stroke. As the piston once again returns up in the final stroke of the cycle, an exhaust valve opens at the top of the cylinder and the exhaust is pushed out. The timing belt is what coordinates the opening and closing of the intake and exhaust valves. It's called a timing belt because the valves have to open and close at just the right time.

Now, not all vehicles have timing belts. Some have timing chains. Like the name implies, they use a chain rather than a belt to perform the function. It used to be that most engines used timing chains, which are extremely durable. The leading vehicle manufactures started using belts rather than chains to save money in the manufacturing process. So now North Kingstown drivers and their advisors at Hans Imports are left with a component that can break. They sort of shifted the problem to us. There are two broad categories of engine design: interference and non-interference. If the timing belt on a non-interference engine breaks, the engine simply stops running. That could be very dangerous for drivers depending on where they are at the time, but it causes no internal engine damage.

Interference vehicle engines, on the other hand, will get real messed up when the timing belt breaks, because the valves will actually fall down into the path of the pistons. Things get chewed up when that happens and it'll cost a chunk of change to repair the vehicle engine.

So, what are the warning signs? Unfortunately, there really aren't any. There aren't tell-tale sounds. In some vehicles, a technician from Hans Imports may be able to see part of the belt for a visual inspection, but many have a cover that's in the way. The reality is that if the belt slips even one notch, it might as well be broken for all the damage it'll cause. There's no middle ground.

So how can we avoid these problems? Simply replace the timing belt when your owner's manual calls for it. It can be 60,000 miles/97,000 km; it might be 90,000 or 100,000 miles/145,000 or 160,000 km. The point is, if you have 60,000 or more miles (97,000 or more km), ask your Hans Imports service advisor right away if your vehicle requires a timing belt replacement.

Contact Hans Imports to learn more about your car's timing belt
You can find us at:

7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

Sometimes North Kingstown drivers can go quite a while without a failure, but we've seen them happen within a couple of oil changes of being due. It's not worth the risk.

What does it cost to replace a timing belt in North Kingstown? Well, that really depends on what kind of car you have. I can tell you that it's usually not very easy to get to the timing belt – you often have to remove some accessories to get at it. It isn't a cheap procedure, but it's a fraction of what it could cost to repair the damage caused by a failure.

At Hans Imports in North Kingstown, we're all about trying to prevent repairs, keeping you and your passengers safe and increasing your driving enjoyment. 

The Hans Imports Basic Guide To Synthetic Oil

Synthetic motor oil has been around for a long time, and more and more new vehicles are leaving factories with synthetic in their engines. But a lot of drivers don't really know much about it.

Let's start with conventional oil – the kind folks are used to. Conventional oil is made up of naturally occurring hydrocarbon chains, which means its molecules are long and have various lengths. Like a pile of pencils, some of them new and some of them used.

Synthetic oil is man-made. Its molecules are more uniform and regular in shape – more similar to marbles than pencils. Some synthetic oil starts with a petroleum base that's modified and others are entirely synthesized from other materials.

Synthetic motor oil works better in both hot and cold temperatures. It's more chemically stable so it doesn't readily evaporate or break down in the high heat produced inside your vehicle engine. This means it resists turning to sludge, which is a real engine killer.

Remember that marbles and pencils thing we were talking about? Well, that makes synthetic oil slipperier than conventional oil which means less friction in your engine. Your vehicle engine runs cooler, wears less and lasts longer. You also get a boost in power and maybe even an improvement in fuel economy.

Synthetic oil also lasts longer so you change it less often – which is great for the environment. With longer oil change intervals, you need an oil filter specifically built for the longer service life of synthetic oil. Talk with your friendly and knowledgeable Hans Imports service adviser about synthetic oil and synthetic blends – they might be just what you need to improve engine performance and extend the life of your vehicle.

Give us a call.

Sniffing Out a Problem

Your parents probably taught you to have common sense. When it comes to your vehicle, common scents can also come in handy. Different smells may tell you about some conditions in your vehicle that need attention.

For example, you know what rotten eggs smell like.  If you smell them around your vehicle, it means sulfur can't be far away. Here's a surprising fact: Gasoline has a little sulfur in it.  There's a device in your exhaust system that's supposed to convert it to something that doesn't pollute the atmosphere. That device is a catalytic converter.  If you are smelling rotten eggs, maybe your catalytic converter is wearing out.  But it could also be a problem with your fuel injectors.  Either way, something's rotten that should be repaired.

Ever smell something sweet around your vehicle, maybe a little like pancake syrup? If you sniff out a little sweetness just when your engine is warming up or after you shut off your engine, you might be smelling some coolant (anti-freeze).  If it's leaking, then you may be getting a whiff of ethylene glycol, one of the coolant's components.  If the odor is strong inside the car, it could be a leaky heater core. This is important to get checked out because a leak in your vehicle's cooling system can eventually cause expensive damage.

How about that distinctive smell of gasoline? You could have a leak in your gas tank, a hose that vents your gas tank or a leak in a fuel injector line.  A gasoline leak needs to be tracked down since it could catch fire.  It can also be bad for your health if you breathe it in all the time.

When you step hard on the brakes, ever smell something like a rug's in fire? That could mean you've just overheated your brake pads.  If you detect that smell just driving around town, one of the brake calipers could be stuck.  To figure out which wheel has the problem, get out of your vehicle and smell each wheel.  It will likely be obvious where the problem is.

Here's one last smell.  Ever had your oil changed and right after you picked up your vehicle it smells like something's burning around the engine? That's because sometimes a little oil leaks onto the metal when the filter is changed or the oil is poured in.  It's a useful smell to know.  Because of you smell burning oil and you haven't had your oil changed recently, that could mean you have a leak in your engine.  It could be a gasket or a seal, but it also could mean the start of more serious issues. 

All of these things are signals that you should discuss with your service advisor to get them checked out.